| 序号 |
论文名称 |
发表期刊 |
检索（来源） |
发表时间 |
| 1 |
The computer aided design intelligent system of threshing parts of combined harvester |
2012 3rd International Conference on Computing, Control and Industrial Engineering |
EICA |
2012年 |
| 2 |
The implementation of ieee 1588-2008 precision time protocol on the STM32F107 |
Key Engineering Materials |
EIJA |
2012年 |
| 3 |
Design of the control system for high-altitude descent control device |
Advances in Intelligent and Soft Computing |
EIJA |
2012年 |
| 4 |
A novel controller design approach based on object-oriented virtual prototyping |
Proceedings of the 2012 IEEE 16th International Conference on Computer Supported Cooperative Work in Design |
EICA |
2012年 |
| 5 |
low frequency band gap study of three-dimensional quaternary phononic crystals with aluminum matrix |
华中科技大学学报.自然科学版 |
EIJA |
2013年 |
| 6 |
The current situation and future trends in electric vehicle vibration and noise problem investigation |
International Journal of Electric and Hybrid Vehicles |
EIJA |
2013年 |
| 7 |
The Implementation of S-curve Acceleration and Deceleration Using FPGA |
Indonesia Journal of Electrical Engineering |
EIJA |
2013年 |
| 8 |
Research on distributed multi-axis motion control system based on Canopen |
Key Engineering Materials |
EIJA |
2013年 |
| 9 |
Research on workshop equipment information transmission based on wireless sensor network |
Key Engineering Materials |
EIJA |
2013年 |
| 10 |
Research and implementation of time synchronization protocol based on the zigbee |
Advanced Materials Research |
EICA |
2013年 |
| 11 |
Energy-Efficient Routing Protocol of Wireless Sensor Network for Industrial Application |
Key Engineering Materials |
EIJA |
2013年 |
| 12 |
CANbus Hybrid Scheduling Algorithm Based on DMS and EDF |
Advanced Materials Research |
EICA |
2013年 |
| 13 |
Research on Technologies of Augmented Reality for CNC Machining Process Simulation |
Key Engineering Materials |
EIJA |
2013年 |
| 14 |
Experimental Study on a Novel Low-temperature Automobile Exhaust Thermoelectric Generator |
Information Technology Journal |
EIJA |
2014年 |
| 15 |
Phononic First Band Gap of Quaternary Layered Periodic Structure with the Lumped-Mass Method |
Shock and Vibration |
SCI4/EI |
2014年 |
| 16 |
A study on energy consumption optimization for cooperative |
Trans Tech Publications Ltd |
EIJA |
2014年 |
| 17 |
Research on wireless sensor networks based on open source system |
Trans Tech Publications Ltd |
EIJA |
2014年 |
| 18 |
粗糙度纹理对有限长线接触混合润滑影响 |
摩擦学学报 |
EIJA |
2015年 |
| 19 |
A Micro-TEHL Finite Line Contact Model for a Helical Gear Pair |
SAGE PUBLICATIONS LTD |
SCI4 |
2015年 |
| 20 |
Improved CTP routing protocol based on ant colony algorithm |
Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics) |
EICA |
2015年 |
| 21 |
A V-BLAST-based cooperative MIMO transmission scheme for heterogeneous wireless sensor networks |
Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics) |
EICA |
2015年 |
| 22 |
The research on WSNs localization algorithm for danger area warning |
International Journal of Future Generation Communication and Networking |
EICA |
2015年 |
| 23 |
Damping performance of bean bag dampers in zero gravity environments |
Journal of Sound and Vibration |
SCI2/EI |
2016年 |
| 24 |
Parametric studies of lubrication performance of a helical gear pair with non-Newtonian fluids |
Journal of Mechanical Science and Technology |
EIJA |
2016年 |
| 25 |
Structural optimization for rack of boat-type tractor based on sensitivity analysis |
农业工程学报 |
EIJA |
2016年 |
| 26 |
Predicting fatigue lifefor finite roller contacts based on a mixed EHL model using realistic surface roughness |
Journal of Mechanical Science and Technology |
SCI4/EI |
2017年 |
| 27 |
A fast hierarchical MRF sonar image segmentation algorithm |
INTERNATIONAL JOURNAL OF ROBOTICS & AUTOMATION |
SCI4 |
2017年 |
| 28 |
An improved hierarchical genetic algorithm for collaborative optimization of manufacturing processes in metal structures manufacturing system |
Advances in Mechanical Engineering |
SCI4 |
2017年 |
| 29 |
Fatigue analysis for laser welded Al-alloy joints with the fictitious notch radius rf=0.05mm |
Theoretical and Applied Fracture Mechanics |
SCI2 /EI |
2017年 |
| 30 |
Development of tiny remotely controlled electric cultivator for greenhouses |
2017 9th IEEE International Conference on Communication Software and Networks, ICCSN 2017 |
EICA |
2017年 |
| 31 |
Development of tiny remotely controlled electric crawler cultivator for greenhouses |
Proceedings of 2017 IEEE 3rd Information Technology and Mechatronics Engineering Conference, ITOEC 2017 |
EICA |
2017年 |
| 32 |
Static Analysis of the tiny cultivator blade and modal analysis of blade roller based on solid works |
Proceedings of 2017 IEEE 3rd Information Technology and Mechatronics Engineering Conference, ITOEC 2017 |
EICA |
2017年 |
| 33 |
Realization of the special M/T method on a tiny crawler-type cultivator |
Proceedings of the 2017 IEEE 2nd Information Technology, Networking, Electronic and Automation Control Conference, ITNEC 2017 |
EICA |
2018年 |
| 34 |
Parametric Studies of Mechanical Power Loss for Helical Gear Pair Using a Thermal Elastohydrodynamic Lubrication Model |
Journal of Tribology |
SCI4/EI |
2018年 |
| 35 |
The Transient and Thermal Effects on EHL Performance of a Helical Gear Pair |
Tribology Online |
EIJA |
2018年 |
| 36 |
Discrete element method of electromagnetic particle damper with a ferromagnetic end cover |
Journal of Sound and Vibration |
SCI2 |
2019年 |
| 37 |
Thermal elastohydrodynamic lubrication analysis of helical gear pair under starved lubrication condition |
Lubrication Science |
EIJA |
2019年 |
| 38 |
Predicting Fatigue Life for Finite Line Contact under Starved Elastohydrodynamic Lubrication Condition |
Mathematical Problems in Engineering |
SCI4 |
2020年 |
| 39 |
基于ＥＤＥＭ 的鱼苗分选机设计与工作参数优化 |
农业机械学报 |
EIJA |
2020年 |
| 40 |
Energy Efficient Node Deplogment Optimization for CTS Based on Cooperative Beamforming in Single-Hop Wireless Sensor Networks |
Pleiades Publishing Automatic control and Computer Sciences |
EIJA |
2020年 |
| 41 |
Operation faults monitoring of combine harvester based on SDAE-BP |
农业工程学报 |
EIJA |
2020年 |
| 42 |
Research and Implement of Control Platform Based on ROS for Robot Arm |
Proceedings of the 3rd International Conference on Mechatronics and Intelligent Robotics, ICMIR 2019 |
EICA |
2020年 |
| 43 |
Research of control system for plant protection UAV based on Pixhawk |
Proceedings of the 3rd International Conference on Mechatronics and Intelligent Robotics, ICMIR 2019 |
EICA |
2020年 |
| 44 |
Optimization of a Predictive Model for Rapid Detection of Egg Freshness Using Visible Near-Infrared Spectra Based on Combination of Feature Selection and Feature Extraction |
食品科学 |
EIJA |
2020年 |
| 45 |
Influence of helix geometric parameters on surface quality during laser cutting of photovoltaic float glass |
optik |
SCI4 |
2020年 |
| 46 |
A Refined Composite Multivariate Multiscale Fluctuation Dispersion Entropy and its Application to Multivariate Signal of Rotating Machinery |
Entropy |
SCI3 |
2021年 |
| 47 |
A Heuristic Approach for Two-Dimensional Rectangular Cutting Stock Problem considering Balance for Material Utilization and Cutting Complexity |
Advances in Materials Science and Engineering |
SCI4/EI |
2021年 |
| 48 |
Tribological properties of a helical gear pair considering interfacial slip between lubricant and tooth surface |
Lubrication Science |
SCI4/EI |
2022年 |
| 49 |
Lubrication performance of helical gear pair under dynamic load based on local involute profile
|
Journal of Tribology |
SCI4 |
2022年 |
| 50 |
Investigation of Operating Performance of Single-Side Paddy Field Ridger Based on Discrete Element Method and Test Verification |
Journal of Agricultural Science and Technology |
SCI4 |
2022年 |
| 51 |
克氏原螯虾头尾自动定向装置参数优化及试验 |
农业工程学报 |
EIJA |
2022年 |
| 52 |
Combine Harvester Bearing Fault-Diagnosis Method Based on SDAE-RCmvMSE |
ENTROPY |
SCI3 |
2022年 |
| 53 |
Bearing Fault Diagnosis Based on SA-ACGAN Data Generation Model |
Zhongguo Jixie Gongcheng/China Mechanical Engineering |
EIJA |
2022年 |
| 54 |
Buckling Analysis of a Composite Honeycomb Reinforced Sandwich Embedded with Viscoelastic Damping Material |
Applied Sciences-Basel |
SCI3 |
2022年 |
| 55 |
Study on Damping Behavior of Electromagnetic Particle Dampers with a Ferromagnetic End Cover in Weightless Environments |
Microgravity Science and Technology |
SCI3 |
2022年 |
|
|
|
|
|
