科研项目及成果：
1、纵向项目
[1]参与国家重点研发计划项目《设施水产养殖智能化精细生产管理技术装备研发》
[2]参与国家自然科学基金项目《优化下料的复杂约束状态问题及其系统处理方法研究》
2、横向项目
[1] 针对二维汽车钣金件连续落料生产线的优化排样系统研发
[2] 针对二维汽车钣金件连续落料生产线的智能切割刀路优化设计系统研发
[3] 基于激光雷达的室内AMR建图和定位系统研发
3、发表论文
[1] Wu D J, Yang G Y. A Heuristic Approach for Two-Dimensional Rectangular Cutting Stock Problem considering Balance for Material Utilization and Cutting Complexity[J]. Advances in Materials Science and Engineering, 2021, 2021, 3732720. (SCI检索)
[2] Wu D J, Yan C P. A balance approach for the one-dimensional multiple stock size cutting stock problem with setup cost[J]. Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture, 2016, 230(12): 2182-2189. (SCI检索)
[3] Wu D J, Yan C P. Balanced approach for the two-dimensional rectangular guillotine cutting stock problem with setup cost[C]. The 4th International Conference on Mechanical Engineering and Green Manufacturing 2018 (MEGM 2018), Xian, P.R. China, 2018 August 16-18. (EI检索)
[4] Wu D J, Yan C P. An optimization method for cutting stock problem with complex application requirements in cloud manufacturing[C]. The 6th International Conference on Frontiers of Manufacturing Science and Measuring Technology 2018 (FMSMT 2018), Taiyuan, P.R. China, 2018 September 6-9. (EI检索)
[5] 吴电建,张三强,杨光友.复杂下料工艺约束下的二维不规则零件优化排样方法[J].中国机械工程,2023,34(21):2615-2621. (EI检索)
[6] 吴电建,张三强,杨光友.克氏原螯虾头尾自动定向装置参数优化及试验[J].农业工程学报,2022,38(09):44-52. (EI检索)
[7] 吴电建, 阎春平, 李俊, 曹卫东. 面向可加工性的矩形件优化排样方法[J].计算机集成制造系统. 2018, 24(06): 1374-1382. (EI检索)
[8] 吴电建,张彪，周明刚. 面向排样方式中零件种类数约束的一维优化下料方法[J].现代制造工程,2021,(08):77-83. (CSCD检索)